Previous Topic

Next Topic

Book Contents

Book Index

Kinetic Modeling

The behavior after completion of the TAC-calculations depends on the configuration of the KM buttons on the Kinetic Modeling page:

PCARD Automatic Modeling

With this manual configuration the PCARDP tool just switches to the Kinetic Modeling page and shows the calculated TACs.

PCARD Manual Kinetic Modeling

With this automatic configuration the PCARDP starts modeling of the calculated TACs with the configured model immediately in the background (recommended). The model is fitted to each of the TACs, the results are returned and then shown on the Kinetic Modeling page for inspection.