|
|
|
|
|
In PMOD, each loaded image series has a set of attributes. Depending on the loaded image format they may be partly empty. Using the 
button, the information can be shown in a dialog window as illustrated below.
The Edit Time button can be used to view and modify the acquisition times. To modify the study information use the Edit Info button which displays the following data editor:
Note the SUV PARAMETERS tab which houses the information relevant for the SUV calculation. All these fields must be completed. For more information please refer to the section Inspecting SUV Values.
If the anatomical annotations are not correct, for instance because wrong patient positioning information was entered at the acquisition console, the PATIENT POSITION tab can be used for correction purposes. The buttons represent the view when looking at the transaxial images. As soon as a button is activated, the annotations in the images are adjusted.
